Hot!!! Fast Curing Acetic Cure Silicone Sealant for Indoor Sealing

RTV-1, Acetoxy-curing General purpose Fast curing, short Skin forming time Good adhesion , Non-yellowing

Characteristics

HX-1100 is one-component, acetic-curing silicone sealant for general purpose sealing in do-it-yourself application..

HX-1100 cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.

Special characteristics

¨        Non-sag

¨        Ready gunnability at low (+5°C) and high (+40°C) temperatures.

¨        Flexible at low (-40°C) and high temperatures (+100°C)

¨        Rapid cross-linking

¨        Flexible at low(-40°C )and high temperatures(+150°C)

¨        Good tooling characteristics

Color:

Transparent, Black, White, Grey,

other colors are available according customer's require

Application

DIY application (car, boat, caravan, house)

Adhesion

HX-1100 exhibits good adhesion to most non-porous siliceous material, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker.

Users must carry out their own tests due to the great variety of substances.

The adhesion can be improved in many cases by pretreatment of the substrates with a primer.

Restrictions on use

HX-1100 is not recommended for use on substrates, such as marble, concrete, fibrous cement and mortar, as the product releases acetic acid during curing.

HX-1100 may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.

HX-1100 should not be used in contact with metals such as lead, cooper, brass or zinc due to corrosion.

HX-1100 is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.

HX-1100 is not recommended for sealing of aquaria.

HX-1100 is not recommended for structural glazing bonding.

The curing time can be extended at lower temperature, low humidity or by low volume of air change.

Package:

	Content	Package size	Boxes size	Boxes/pallet
Cartridge	300ml	24	305(L)*205(W)*240(H)mm	72

Shelf Life

At least 9 months

Storage

Please keep the product stored in a cool (below 25°C), dry place in moisture-tight original container.

The best before date of each batch is shown on the package.

Product data

Property	Unit	Value
Density at 23C	[g/cm3]	0.95
Consistency		Non-sag
Extrusion rate at 23C	[ml/min]	600
Skin-forming time at 23C/50% r.h.	[min]	15
Hardness, Shore A	SHA	18
Tensile strength	[N/mm2]	0.3
Ultimate elongation	[%]	550
Modulus at 100% elongation	[N/mm2]	0.25

(These figures are intended as a guide and should not be used in preparing specifications)

Hot!!! Fast Curing Acetic Cure Silicone Sealant for Indoor Sealing